Hyster H40-60XT, Руководство по эксплуатации

Страница: 55 / 180

• Fuel level.
• Oil level in the engine.
• Oil level in the hydraulic tank.
• Leaks from the engine, transmission, hydraulic system,
and fuel system.
• Loose or missing hardware.
• Check transmission oil level.
Mounting and Dismounting
WARNING
To avoid serious injury when entering or exiting the lift
truck, ALWAYS USE 3 POINTS OF CONTACT. Maintain
contact simultaneously with two hands and one foot or
with two feet and one hand while climbing on or off the
lift truck.
Place feet carefully. Always face the lift truck when climbing
on or off. Use added care when surfaces are slippery. Keep
hands free of any obstacles such as food, beverages, or
tools.
Lift Truck Interlocks
Certain operator actions, if not performed correctly while
operating the lift truck, will cause traction and the hydraulic
functions to become disabled.
DRIVE INTERLOCKS: Traction is enabled when the opera-
tor is in the seat (occupancy sensor), seat belt should be
fastened, a direction of travel is selected, engine is running,
and the parking brake is released. If any of the above
actions are not performed while operating the lift truck, trac-
tion will be disabled. To reactivate traction, the operator
must return to the seat. Once the needed actions are com-
pleted, traction will be enabled and the operator can con-
tinue to load and unload material.
HYDRAULIC INTERLOCKS: The hydraulic functions are
enabled when the operator is in the seat (occupancy sen-
sor), seat belt should be fastened, and the engine is run-
ning. If any of the above actions are not performed while
operating the lift truck, the hydraulic functions will be disa-
bled. The LCD screen on the display panel will provide a
non-service fault message "Hydraulic Interlock Engaged."
To reactivate hydraulics, the operator must return to the
seat. Once the needed actions are completed, the
Operating Procedures
53