Hyster CHALLENGER H165XL Скачать руководство пользователя страница 62

Страница: 62 / 117

OPERATING PROCEDURES

PARKING

The operator must never leave a lift truck in a condition so

that it can cause damage and injury. When parking the lift
truck, do the following operations:

1. Stop the lift truck and apply the parking brake.

2. Fully lower the forks, carriage or attachment. Tilt mast

forward until the tips of the forks touch the ground.

3. On units with a direction control lever, put the control
lever for the transmission in

NEUTRAL

4.Turn the key switch to

OFF

to stop the engine.

5. If the lift truck must be left on an incline, put blocks on

the down hill side of the wheels so that the lift truck can
not move.

6. Check engine compartment if operating in areas con-
taining combustible material. (See

page 29, FIRE HAZ-

ARD)

If the lift truck is equipped with an LPG fuel system and is

parked more than momentarily, close the fuel valve at the
tank. If the lift truck is going to be left over night or longer,
the truck must be parked outside or the LPG tank must be

removed and stored outside.

Do not park the lift truck so that it limits access to fire
aisles, stairways, and fire equipment.

Property of American Airlines

Содержание CHALLENGER H165XL






















































































































Результаты поиска

Содержание CHALLENGER H165XL

Отзывы:

Похожие инструкции для CHALLENGER H165XL

Бренды по названию

Популярные бренды

Hyster CHALLENGER H165XL, Руководство по эксплуатации

Результаты поиска

Содержание CHALLENGER H165XL

Отзывы:

Похожие инструкции для CHALLENGER H165XL

Бренды по названию

Популярные бренды