Hyster CHALLENGER H165XL, Руководство по эксплуатации

Страница: 57 / 117

OPERATING PROCEDURES
55
3. Lower the container and attachment until the amber
lights come on.
4. Tilt the mast slightly forward.
5. Push on the rear of the lock pin switch to retract the
lock pins. Make sure the green lights are off. Also check
that the indicator flags are in the disengaged position. See
FIGURE 7.
NOTE: The audible alarm will beep when the lock pin
switch is pushed to retract the lock pins. If for any reason
the lock pins do not move to the disengaged position, the
alarm will continue to make a sound.
6. Lift the attachment from the container. The amber lights
will go off. Move the lift truck and lower the attachment for
travel.
CAUTION
Do not hit the attachment on other containers or ob-
jects. The attachment can be damaged by hitting
other objects. This is especially important when ex-
tending or retracting the outer booms of the attach-
ment.
Load Handling, Traveling
1. When traveling with the load lowered, keep the load
against the carriage and the mast tilted fully backward.
This will help keep the load on the forks and give good
forward and side stability.
2. Travel with the lift mechanism raised only enough to
clear the ground or obstacles.
When the mast, carriage or load is in a raised position the
stability of the lift truck is reduced. This is also critical
when the lift truck is not carrying a load. The ability of the
lift truck to resist side tipping can be less on a lift truck
without a load than it is on a lift truck with a load in the
lowered (travel) position. Therefore, a lift truck without a
load is more likely to tip sideways, especially in a turn,
than a lift truck with a load carried in the lowered position.
3. For better visibility with large loads, travel with the load
trailing, but always keep a proper lookout in the direction
Property of American Airlines