Hyster CHALLENGER H165XL Скачать руководство пользователя

Страница: 29 / 117

MODEL DESCRIPTION

ITEM

NO.

ITEM

FUNCTION

Steering Wheel

The steering wheel controls the position of the steer tires.

Lift/Lower

Control

Lever

The lift/lower lever is the first control lever to the right of the steering wheel. Pull

back on the lever to raise the carriage and forks. Push the lever forward to

lower the carriage and forks.

Lift/Lower Control Le-

ver with Two--Speed

Lift Switch (Used with

Empty Container At-

tachment)

The button on the knob for the lift/lower lever lets the operator lift at a higher

than normal speed when the pressure in the hydraulic system is less than 13.8

MPa (2000 psi). (A solenoid valve on the hydraulic pump senses hydraulic

pressure.) Pull back on the lever and push the button to lift at the higher speed.

Tilt Control Lever

The tilt control lever is on the right of the lift/lower control lever. Push the

control lever forward to tilt the mast and forks forward. Pull backward on the

control lever to tilt the mast and forks backward.

Auxiliary Control Lever

If the lift truck is equipped with an attachment, such as a side--shift carriage, an

additional lever for the control of this attachment will be installed to the right of

the tilt control lever. (See TABLE 4.)

Side--Shift Control

Lever (Used with

Empty Container

Attachment)

Push the lever forward to move the attachment to the left. Pull back on the

lever to move the attachment to the right.

Property of American Airlines

Содержание CHALLENGER H165XL






















































































































Результаты поиска

Содержание CHALLENGER H165XL

Отзывы:

Похожие инструкции для CHALLENGER H165XL

Бренды по названию

Популярные бренды

Hyster CHALLENGER H165XL, Руководство по эксплуатации

Результаты поиска

Содержание CHALLENGER H165XL

Отзывы:

Похожие инструкции для CHALLENGER H165XL

Бренды по названию

Популярные бренды