Hyster A935 J1.6-2.0XN, Руководство по обслуживанию и ремонту

Страница: 21 / 25

6.
Use a crane with a capacity of at least
450 kg (992 lb) to lift outer frame away from
the inner frame (see Figure 11). Lay the outer
frame flat on a pallet or workbench.
1. OUTER FRAME
2. LIFTING HOOK
3. LIFTING DEVICE
Figure 11. Remove Outer Frame
Disassemble
1.
Remove the upper and lower bearings from the
inner frame. See Figure 10.
2.
If damaged, remove lube fittings from outer
frame.
3.
Disassemble the sideshift cylinder. See the sec-
tion Cylinder Repair (Mast S/N A270-72,
A551, A555, A559, A626, A627, A751-52,
B551, B555, B586-91, B749-54, C661-63,
C665, D507-09, D515, D562-64, E509, E564)
2100SRM1382 for procedures.
Clean and Inspect
1.
Inspect the lower mounting hooks for wear. Re-
place the hooks if they are worn beyond the
wear limit. The wear limit clearance range is
0.76
mm (0.03 in.) minimum and
1.52 mm (0.06 in.) maximum. See A in Fig-
ure 12.
A. WEAR LIMIT - 0.76 mm (0.03 in.) MINIMUM AND
1.52 mm (0.06 in.) MAXIMUM.
B. CLEARANCE ADJUSTMENT - 0.76 mm (0.03 in.)
MINIMUM AND 1.52 mm (0.06 in.) MAXIMUM.
Figure 12. Lower Mounting Hooks Wear Limit and
Clearance Adjustment
4000 SRM 1386 Carriages Repair
15