Table 1. Fork Tip Alignment
Fork Tip Alignment Specifications
Standard Fork
Lengths
Maximum Fork Tip
Difference
1
mm
(in.)
mm
(in.)
914
(36)
27
(1.08)
1067
(42)
32
(1.26)
1219
(48)
37
(1.44)
1372
(54)
41
(1.62)
1524
(60)
46
(1.80)
1829
(72)
55
(2.16)
1
Difference of alignment between fork tips must be
no more than 3% of the total fork length.
Some applications may require closer alignment. If
the forks do not meet specification, they both must
be replaced. Check that the bottom of each fork is
not excessively worn. Check for smooth and proper
operation of the fork lock pins. Repair or replace
any damaged or broken fork lock pins or compo-
nents and lubricate, as necessary. See Figure 5.
A.
HEEL OF FORK (MUST BE 90% OF DIMEN-
SION B)
B.
ORIGINAL FORK THICKNESS (DIMENSION B)
1. TIP ALIGNMENT (MUST BE WITHIN 3% OF
FORK LENGTH)
2. CRACKS
3. MAXIMUM ANGLE 93°
4. FORK REMOVAL NOTCH
5. CARRIAGE
Figure 7. Fork Check
4000 SRM 1386
Fork Replacement
9
Содержание A935 J1.6-2.0XN
Страница 1: ...Hyster A935 J1 6 2 0XN J30 35 40XN Forklift...
Страница 6: ...THE QUALITY KEEPERS HYSTER APPROVED PARTS...
