HyQuest Solutions iRIS Under Cover, Руководство пользователя

Страница: 90 / 117

© 2022 HyQuest Solutions 90
Operation
Element Description
<SiteName> Site name of the iRIS
<SerialNumber> Serial number of the iRIS
<DateTime> Time of the message as it is sent using the device local settings
<n> Module number (either 1 or 2)
<t> Interval time (minutes) that has been change to.
For example:
For iRIS loggers fitted with more than one telemetry module, this command will only affect the schedule of
the cellular module of which the SIM is fitted.
OUT – Change the state of the digital OUTputs.
This command allows the user to control the digital outputs of the device. For this feature to be effective the digital
output must be configured to Remote mode (see section
Digital I/O (Pro) ). Also, the iRIS will only act on the command if
the received command is from one of the phone number in the approved/authorised SMS list (see section SMS
Numbers for configuring these number).
The possible commands are:
Command Description
OUTx y Change digital output x to state y.
x = 1 – Digital IO (DIO) terminal
x = 2 – Digital Out (DO) terminal
y = 0 – Off
y = 1 – On
OUTx=y Same as above
The response is in the format (if the senders SMS number is authorised)
<SiteName> (<SerialNumber>)<DateTime>:<MessageN> <State>
The response is in the format (if the senders SMS is not authorised)
<SiteName> (<SerialNumber>)<DateTime>:<NotAuthMsg>
33
55