HyQuest Solutions iRIS Under Cover, Руководство пользователя

Страница: 78 / 117

© 2022 HyQuest Solutions 78
Configuration
11. Create three objects and points with Object Type: Analogue Output :
12. The points associated with these objects should have unique (with in the group) Identifier of 0, 1 and 2.
13. Create three objects and points with Object
Type: Analogue Input :
14. The points associated with these objects should have unique (with in the group) Identifier of 0,1 and 2.
15. Configure the PLC to poll the iRIS with the following details:
Function: Write Multiple Holding Registers
Slave Address: 0
Register address: 40201 or 200 (depends on PLC operation)
Number of registers
to write: 3
Register data type: Signed 16-bit Integer
16. Configure the PLC to poll the iRIS with the following details:
Function: Read Multiple Holding Registers
Slave Address: 0
Register address: 40204 or 203 (depends on PLC operation)
Number of registers
to retrieve: 3
Register data type: Signed 16 bit Integer
The configuration is complete. To aid in understanding the data flow in this example the following table may act as a
visualisation. The Objects listed are those created above (the actual names will different in reality, for example Gate height
SP, etc.).