Hypertherm SmartSYNC Robotic Torch, Руководство оператора

Страница: 28 / 44

Operate the Robotic Torch
4
28 811450 Operator Manual SmartSYNC Robotic Torches
Select the best cartridge for the material you that you want to cut
.
Cutting guidelines

Always start with the recommended settings from the cut charts. Refer to the
Powermax65/85/105 SYNC Cut Charts Guide (810500MU).

Do not let the torch touch the workpiece during cutting system operation. Contact with the
workpiece can cause damage to the cartridge and to the surface of the workpiece.

Do all cutting system maintenance tasks as scheduled. Refer to Troubleshooting and
Maintenance Tasks on page 35.

Do not fire the torch unnecessarily. It decreases cartridge life.

Starting at the edge of the workpiece is permitted if the arc makes contact
with the workpiece when started.

Prevent lead-outs that move away from the workpiece and stretch the plasma arc.
Metric material thickness (mm)
0.5 1 2 3 5 8 10 12 15 20 25 30
FineCut
45 A
65 A
85 A
105 A
English material thickness (in.)
0.02 0.06 1/8 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2
FineCut
45 A
65 A
85 A
105 A
Optimal cut quality
Near to optimal cut quality
Decreased cut quality or speed