background image

Safety and compliance

11

Warranty

Attention

Genuine Hypertherm parts are the factory-recommended replacement 
parts for your Hypertherm system. Any damage or injury caused by the 
use of other than genuine Hypertherm parts may not be covered by the 
Hypertherm warranty, and will constitute misuse of the Hypertherm 
Product.

You are solely responsible for the safe use of the Product. Hypertherm 
does not and cannot make any guarantee or warranty regarding the safe 
use of the product in your environment.

General

Hypertherm, Inc. warrants that its Products shall be free from defects in 
materials and workmanship for the specific periods of time set forth 
herein and as follows: if Hypertherm is notified of a defect (i) with respect 
to the plasma power supply within a period of two (2) years from the date 
of its delivery to you, with the exception of Powermax brand power 
supplies, which shall be within a period of three (3) years from the date of 
delivery to you, and (ii) with respect to the torch and leads within a period 
of one (1) year from its date of delivery to you, with the exception of the 
HPRXD short torch with integrated lead, which shall be within a period of 
six (6) months from the date of delivery to you, and with respect to torch 
lifter assemblies within a period of one (1) year from its date of delivery to 
you, and with respect to Automation products one (1) year from its date 
of delivery to you, with the exception of the EDGE Connect CNC, 
EDGE Connect T CNC, EDGE Connect TC CNC, EDGE Pro CNC, 
EDGE Pro Ti CNC, MicroEDGE Pro CNC, and ArcGlide THC, which 
shall be within a period of two (2) years from the date of delivery to you, 
and (iii) with respect to HyIntensity fiber laser components within a 
period of two (2) years from the date of its delivery to you, with the 
exception of laser heads and beam delivery cables, which shall be within 
a period of one (1) year from its date of delivery to you.

All third-party engines, engine accessories, alternators, and alternator 
accessories are covered by the respective manufacturers’ warranties and 
not covered by this warranty.

This warranty shall not apply to any Powermax brand power supplies that 
have been used with phase converters. In addition, Hypertherm does not 
warranty systems that have been damaged as a result of poor power 
quality, whether from phase converters or incoming line power. This 
warranty shall not apply to any product which has been incorrectly 
installed, modified, or otherwise damaged.

Hypertherm provides repair, replacement or adjustment of the Product as 
the sole and exclusive remedy, if and only if the warranty set forth herein 
properly is invoked and applies. Hypertherm, at its sole option, shall 
repair, replace, or adjust, free of charge, any defective Products covered 
by this warranty which shall be returned with Hypertherm’s prior 
authorization (which shall not be unreasonably withheld), properly 
packed, to Hypertherm’s place of business in Hanover, New Hampshire, 
or to an authorized Hypertherm repair facility, all costs, insurance and 
freight pre paid by the customer. Hypertherm shall not be liable for any 
repairs, replacement, or adjustments of Products covered by this 
warranty, except those made pursuant to this paragraph and with 
Hypertherm’s prior written consent.

The warranty set forth above is exclusive and is in lieu of all other 
warranties, express, implied, statutory, or otherwise with respect to the 
Products or as to the results which may be obtained therefrom, and all 
implied warranties or conditions of quality or of merchantability or fitness 
for a particular purpose or against infringement. The foregoing shall 
constitute the sole and exclusive remedy for any breach by Hypertherm 
of its warranty.

Distributors/OEMs may offer different or additional warranties, but 
Distributors/OEMs are not authorized to give any additional warranty 
protection to you or make any representation to you purporting to be 
binding upon Hypertherm.

Patent indemnity

Except only in cases of products not manufactured by Hypertherm or 
manufactured by a person other than Hypertherm not in strict conformity 
with Hypertherm’s specifications and in cases of designs, processes, 
formulae, or combinations not developed or purported to be developed 
by Hypertherm, Hypertherm will have the right to defend or settle, at its 
own expense, any suit or proceeding brought against you alleging that 
the use of the Hypertherm product, alone and not in combination with 
any other product not supplied by Hypertherm, infringes any patent of 
any third party. You shall notify Hypertherm promptly upon learning of any 
action or threatened action in connection with any such alleged 
infringement (and in any event no longer than fourteen (14) days after 
learning of any action or threat of action), and Hypertherm’s obligation to 
defend shall be conditioned upon Hypertherm’s sole control of, and the 
indemnified party’s cooperation and assistance in, the defense of the 
claim.

Limitation of liability

In no event shall Hypertherm be liable to any person or entity for 
any incidental, consequential direct, indirect, punitive or 
exemplary damages (including but not limited to lost profits) 
regardless of whether such liability is based on breach of 
contract, tort, strict liability, breach of warranty, failure of 
essential purpose, or otherwise, and even if advised of the 
possibility of such damages. Hypertherm shall not be liable for 
any losses to Distributor based on down time, lost production or 
lost profits. It is the intention of the Distributor and Hypertherm 
that this provision be construed by a court as being the 
broadest limitation of liability consistent with applicable law.

National and local codes

National and local codes governing plumbing and electrical installation 
shall take precedence over any instructions contained in this manual. 
In no event shall Hypertherm be liable for injury to persons or property 
damage by reason of any code violation or poor work practices.

Содержание SmartSYNC Robotic Torch













































Отзывы: