Hypertherm SmartSYNC Robotic Torch, Руководство оператора

Страница: 21 / 44

Mount the Robotic Torch
3
SmartSYNC Robotic Torches Operator Manual 811450 21
2. Disconnect the front half of the clamp by removing the 4 screws .
3. Align the torch with the rear half of the
clamp
using either the increment
markings or the positioning
holes .

If you are using the increment
markings, remove the
positioning dowel
. Push
the dowel through the clamp.
4. Make sure that the anti-rotational
tabs
on each half of the torch
clamp are aligned with the slot in
the torch.
1 2
1
2
5
2
6
3
4
1
1
2
3
4
5
6