Hypertherm POWERMAX 45 Скачать руководство пользователя

Страница: 21 / 93

SpecificationS

powermax

Operator Manual

1-7

Symbols and marks

Your Hypertherm product may have one or more of the following markings on or near the data plate. Due to differences

and conflicts in national regulations, not all marks are applied to every version of a product.

S mark symbol

The S mark symbol indicates that the power supply and torch are suit able for operations carried out in

environments with in creased hazard of elec tri cal shock per IEC 60974-1.

CSA mark

Hypertherm products with a CSA mark meet the United States and Canadian regulations for product safety.

The products were evaluated, tested, and certified by CSA-International. Alternatively the product may have

a mark by one of the other Nationally Recognized Testing Laboratories (NRTL) accredited in both the United

States and Canada, such as Underwriters Laboratories, Incorporated (UL) or TÜV.

Ce marking

The CE marking signifies the manufacturer’s declaration of conformity to applicable European directives

and standards. Only those versions of Hypertherm products with a CE marking located on or near the

data plate have been tested for compliance with the European Low Voltage Directive and the European

Electromagnetic Compatibility (EMC) Directive. EMC filters needed to comply with the European EMC

Directive are incorporated within versions of the product with a CE marking.

gOST-TR mark

CE versions of Hypertherm products that include a GOST-TR mark of conformity meet the product safety

and EMC requirements for export to the Russian Federation.

C-Tick mark

CE versions of Hypertherm products with a C-Tick mark comply with the EMC regulations required for sale

in Australia and New Zealand.

CCC mark

The China Compulsory Certification (CCC) mark indicates that the product has been tested and found

compliant with product safety regulations required for sale in China.

UkrSePRO mark

CE versions of Hypertherm products that include a UkrSEPRO mark of conformity meet the product safety and

EMC requirements for export to the Ukraine.

Содержание POWERMAX 45






























































































Результаты поиска

Содержание POWERMAX 45

Отзывы:

Похожие инструкции для POWERMAX 45

Бренды по названию

Популярные бренды

Hypertherm POWERMAX 45, Руководство оператора

Результаты поиска

Содержание POWERMAX 45

Отзывы:

Похожие инструкции для POWERMAX 45

Бренды по названию

Популярные бренды