background image

SpecificationS

1-2

 

powermax

45

 

Operator Manual

System description

The Powermax45 is a highly portable, 45-amp, handheld and mechanized plasma cutting system appropriate for a 

wide range of applications. The Powermax45 uses air or nitrogen to cut electrically conductive metals, such as mild 

or stainless steel or aluminum. With it, you can cut thicknesses up to 25.4 mm (1 inch) and pierce thicknesses up to 

9.5 mm (3/8 inch).

The standard Powermax45 includes one complete set of the consumables needed for cutting (shield, retaining cap, 

swirl ring, nozzle, electrode), 2 spare electrodes, 2 spare nozzles, gouging consumables (handheld configurations only), 

a quick-disconnect air fitting (1/4 NPT on CSA units and 1/4 NPT x G-1/4 BSPP on CE units), a consumables box, 

a shoulder strap, an Operator Manual, a Quick Setup Card, and a Setup DVD. Mechanized configurations include a 

remote-start pendant as well.

You can order additional consumables and accessories – such as the plasma cutting guide – from any Hypertherm 

distributor. See the

 Parts

 section for a list of spare and optional parts.

The power cords on the 200–240 V CSA power supplies are shipped with a 50 A, 250 V plug (NEMA 6-50P) on the 

power cord. The CE units and the 480 V CSA units are shipped without a plug on the power cord. See 

Prepare the 

electrical power

 in the 

Power Supply Setup 

section for more information. 

Where to find information

System specifications, such as size, weight, detailed electrical specifications, and cut speeds can be found in this 

section. For information on:

•   Safety information – see the 

Safety and Compliance Manual

 for detailed safety information.

•   Setup requirements, including power requirements, grounding, power cord configurations, extension cord 

requirements, and generator recommendations – see the

 Power Supply Setup

 section.

•   Handheld and machine torch consumables, cut charts, and torch setup information – see the

 Torch Setup 

section.

•   Information about the controls and LEDs, steps for system operation, and hints for improving cut quality – see 

the

 

Operation 

section.

•   Routine maintenance and repair – see the

 Maintenance and Repair 

section.

•   Part numbers and ordering information for accessories, consumables, and replacement parts – see the

 Parts 

section.

Содержание POWERMAX 45






























































































Отзывы: