Hypertherm HyPerformance Plasma HPR400 Скачать руководство пользователя

Страница: 22 / 355

Sc-6

Safety and Compliance

Safety

A PlASMA ARc cAN cAUSE INJURy AND bURNS

Instant-on torches

•

A plasma arc ignites immediately when the torch switch is activated.

The plasma arc will cut quickly through gloves and skin.

•

Keep away from the torch tip.

•

Do not hold metal near the cutting path.

•

Never point the torch toward yourself or others.

ARc RAyS cAN bURN EyES AND SkIN

Eye protection

Plasma arc rays produce intense visible and

invisible (ultraviolet and infrared) rays that can burn eyes and skin.

•

Use eye protection in accordance with applicable national and local

regulations.

•

Wear eye protection (safety glasses or goggles with side shields,

and a welding helmet) with appropriate lens shading to protect your

eyes from the arc’s ultraviolet and infrared rays.

Skin protection

Wear protective clothing to protect against burns

caused by ultraviolet light, sparks, and hot metal.

•

Wear gauntlet gloves, safety shoes, and hat.

•

Wear flame-retardant clothing to cover all exposed areas.

•

Wear cuffless trousers to prevent entry of sparks and slag.

Also, remove any combustibles, such as a butane lighter or matches,

from your pockets before cutting.

cutting area

Prepare the cutting area to reduce reflection and

transmission of ultraviolet light:

•

Paint walls and other surfaces with dark colors to reduce reflection.

•

Use protective screens or barriers to protect others from flash

and glare.

•

Warn others not to watch the arc. Use placards or signs.

Arc current

Minimum protective shade

number

(ANSI z49.1:2012)

Suggested shade

number for comfort

(ANSI z49.1:2012)

oSHA 29cFR

1910.133(a)(5)

Europe

EN168:2002

Less than 40 A

41 A to 60 A

61 A to 80 A

81 A to 125 A

126 A to 150 A

151 A to 175 A

176 A to 250 A

251 A to 300 A

301 A to 400 A

401 A to 800 A

N/A

PAcEMAkER AND HEARINg AID oPERAtIoN

Pacemaker and hearing aid operation can be affected by magnetic

fields from high currents.

Pacemaker and hearing aid wearers should consult a doctor before

going near any plasma arc cutting and gouging operations.

To reduce magnetic field hazards:

•

Keep both the work lead and the torch lead to one side, away from

your body.

•

Route the torch leads as close as possible to the work lead.

•

Do not wrap or drape the torch lead or work lead around your body.

•

Keep as far away from the power supply as possible.

Содержание HyPerformance Plasma HPR400




































































































































































































































































































































































Результаты поиска

Содержание HyPerformance Plasma HPR400

Отзывы:

Похожие инструкции для HyPerformance Plasma HPR400

Бренды по названию

Популярные бренды

Hypertherm HyPerformance Plasma HPR400, Инструкция по эксплуатации

Результаты поиска

Содержание HyPerformance Plasma HPR400

Отзывы:

Похожие инструкции для HyPerformance Plasma HPR400

Бренды по названию

Популярные бренды