get damaged by heavy objects.
2.
Placing magnetic storage media on top of the UPS may result in data
corruption.
3. Your UPS provides conditioned power to connected equipment.
Maximum load must not exceed that shown on the UPS rating label.
If uncertain, contact Legend
Electrical Safety
DO NOT under any circumstances attempt to remove the UPS cover.
It may contain hazardous voltages internally that may cause electric
shock. There are no user-serviceable parts inside. For service,
please contact your nominated service agent.
1.
The Hypertec UPS will provide a 220~240VAC 1
φ
（
single-phase
）
rate
power source. Please verify that this model matches your AC mains /
load voltage requirements.
2. The Hypertec UPS must be earthed at all times during operation.
This can be achieved by only connecting the input power chord to a
mains supply socket outlet with an integral earth terminal. A means of
disconnecting the mains supply should be within 2 meters of the
UPS.
3.
Output sockets on the UPS are electrically live if the UPS is switched
3
