ON, even if the UPS is not plugged in to mains supply. The On/Off
button on the UPS does not electrically isolate the internal parts. To
isolate the UPS, switch the UPS OFF first, then unplug it from the
mains.
4. To reduce the risk of fire, use fuses with the correct rating when
replacing fuses.
5.
The UPS relies on your building wiring over-current protection, which
must be rated between 10-16 amperes.
6. When using the communication features on the UPS, ensure the
cabling connected to the USB communication port are kept
separated by at least 25 mm from the power cords to and from the
UPS input and output.
Safe Operating Practices
This pluggable type A equipment has factory installed batteries, and hence
may be operated by anyone that has read and understood this manual.
During the installation of this equipment, it should be assured that the sum
of the leakage currents of the UPS and the connected loads does not
exceed 3.5mA.
1.
The mains socket outlet that supplies the UPS shall be installed near
the UPS and shall be easily accessible.
2. When replacing batteries, replace with the same type and number of
batteries.
3. Turn off and unplug your UPS before cleaning. Do not use liquid or
4
