HYOSUNG NH-2700T, Руководство оператора

Страница: 56 / 344

NH-2700T 4. Operating Instructions
4 - 30
4. Remove the roll guide by carefully pulling it off.
5. Add the receipt paper into the rod and then insert the roll guide tightly again to fix it.
6. The shiny side of the paper should be faced up to be printed properly and the metallic tension guide
should be surrounded with paper to reduce the tension during feeding.
7. Insert the leading edge of paper between lower guide and upper guide of the receipt printer slowly.
When the machine is initialized, the paper is going to start feeding.
8. If the paper does not feed at all during initializing, make sure that paper has a CLEAN CUT at the
end and the Thermal Print Head (TPH) is closed as shown in left picture.
9. When finished loading paper, close the rear door with the key.
Roll Guide
Roll Guide
Upper Guide
Lower Guide