manualshive.com logo in svg

HYOSUNG NH-2700T, Руководство оператора

Поделиться
Скачать
HYOSUNG NH-2700T Скачать руководство пользователя страница 29

NH-2700T                                                                                                                4. Operating Instructions   

4 - 3 

4.1.2 How to open the dial lock

 

Make sure that this lock would be set 50-25-50 as factory default setting. 
1. Turn to the counterclockwise for more than four times and set to “50.” 
2. Turn to the clockwise and stop at “25” at the third times.

 

 
 
 
 
 
 

 

 
 
 

 
3. Turn to the counterclockwise and stop at “50” at the second times. 
4. Turn to the clockwise until the dial does not move any more. 

 

 
 
 
 

 
 
 
 
 

 

NOTE:

 The center scale mark is used to open the safe unit 

 

5. The safe door will open when turning the handle to counterclockwise. 

 

Содержание NH-2700T

























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды