HYOSUNG NH-2700T, Руководство оператора

Страница: 37 / 344

NH-2700T 4. Operating Instructions
4 - 11
4.1.4.2 Security Door with Cencon
The Cencon locks are highly-secured, advanced-design locks. Even though the locks are
electromechanical, they require no wiring or batteries for opening the lock because they are self-
powered. Power is generated by turning the dial knob on the lock to the left (counter-clockwise). After
several turns of the knob, enough power is generated to allow the microprocessor in the lock to
function.
Opening and closing the Security Door
Each Cencon Lock is shipped from the factory in Shelved Mode. The One Time Combination feature
which requires a Smart Key is not available when the lock is shelved. Instead, the Shelved Mode
combination is used to open the lock without any Smart Key. The default Factory Combination is set to
50-25-50. Practice opening the lock in shelved mode with the default factory combination until you are
comfortable with its operation. The default combination may be changed, in which case the new
combination would be used to open the lock while in Shelved Mode. The correct opening procedure
for a shelved lock in:
1. Turn the dial to the left (CCW), using full wrist turns, until the letters “EC” (Enter Combination)
appear on the LCD.
NOTE: If you are operating a Cencon lock and –dL appears on the display during an operation, it
indicates that you should d ial L eft (Counter Clockwise). The purpose is both to give the lock additional
power and to ensure the lock bolt is fully extended.
CW = Clockwise; CCW = Counter Clockwise