HYOSUNG NH-2700T, Руководство оператора

Страница: 34 / 344

NH-2700T 4. Operating Instructions
4 - 8
Closing the Security Door
1. To close the security door, push the door completely while turning a handle clockwise. And then
turn the handle counterclockwise to lock it.
2. Turn the external surface of the electronic lock 90 degrees counterclockwise as shown in the
picture
How to change the Electronic Lock combination
ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN
1. Enter 0 - 0 - 0 - 0 - 0 - 0 , six (6) zeros, into the Electronic Lock keypad.
2. Enter in the old combination (existing six (6) digit code) once.
3. Enter in the new combination twice. Combinations must be six digits in length.
NOTE:
1. The Electronic Lock will signal three (3) times if the new combination is invalid and the old
combination has been retained.
Ɣ Valid Code Entry - Double signal after valid six (6) digit code is entered.
Ɣ Invalid Code Entry - Triple signal and old code is still valid.
2. If a mistake is made wait thirty (30) seconds and repeat steps 1. - 3.
3. Test lock operation several times before closing the door.