HYKKER
EN
41
CLEANING AND EXCHANGING BRUSHES
To ensure maximum vacuuming performance, make sure you regularly clean the
brushes from debris sticking to them.
If the brushes are mechanically damaged, replace them immediately with new ones.
Gently clean the brushes from the dirt accumulated
on them. Remove fibres or hair and wash, if
necessary, using a slightly dampened with water cloth
and mild detergent (an unconcentrated dishwashing
liquid will do). Dry with a paper towel or dry cloth.
If the main brush has wound hair, threads or fibres, it is best to remove them from the
device after switching off the device by pressing the power button (2). Remove the
brush cover after pressing down its latches (15).
After removing the brush, you can remove threads, hair and other impurities from the
brush with the included tool. It has a built-in, special blade that allows you to cut
through fibres and hair. On the other side, it has a special comb to comb out dirt from
brushes.
