HYKKER
EN
42
After cleaning and drying, you can install the main brush in reverse order. Pay attention
to the shape of its ends during installation.
If you want to replace the side brushes (9), gather the three arms of one brush together
and pull it out with a firm movement but without jerking with excessive force. The latch
should release. Place the new brush on the latches with the square-edged side until
you hear a click.
After cleaning or replacing the brushes, gently turn the unit into its working position.
CLEANING THE CONTACTS IN THE DOCKING STATION
Keep the contacts clean both in the
unit and in the docking station. Dirty
contacts make it difficult or even
impossible to charge the battery in the
device. Regular cleaning guarantees
a good link between the station and
the device. Use only a soft dry cloth to
clean the contacts.
CLEANING THE WHEELS OF THE MACHINE
Keep the wheels in the machine clean.
If the wheels are dirty, the machine
may have trouble turning or moving
on different surfaces. Regular
cleaning ensures good adhesion of
the machine's wheels to the ground
and thus efficient vacuuming and
operation. For cleaning the wheels
use only a soft, damp, heavily wrung
cloth that does not leave fibres. In the
case of heavy soiling, a small amount
of non-concentrated dishwashing
liquid can be used. After these
treatments, wipe the wheels with
a dry, lint-free cloth and allow to dry
completely.
