31
Operation and maintenance manual, Discfilter HSF2200-1/2F PFC
7.3.3 Changing filter panels
When replacing the filter panels it is important to ma-
intain the balance of the drum. Remove/refit every
other filter panel. This prevents unintentional rotation
of the drum and reduces the load on the drive chain
and gearbox.
NEVER remove or refit all the filter panels only on
ONE side of the disc (see figure 7.10).
1. Turn the main power switch to the OFF (0) position
and lock with a padlock.
2. Undo the filter segment cover screws and remove the cover, see Figure 7.11).
3. Pull out the filter panel (see Figure 7.12).
4. Insert a new filter panel and slide it in until it bottoms.
NB Filter panels with steel frames must be positioned with the filter cloth facing inwards (see
Figure 7.13).
Incorrect installation of the filter panels can cause damage to the filter segments.
Figure 7.10 Correct way of installing filter panels.
Figure 7.12 The filter panel is pulled out.
Figure 7.11 The filter segment cover is removed.
