HydroQuip PLATINUM PS-9003, Руководство по установке и эксплуатации, Страница: 16 / 24

14
Used with PS-9003 and PS-9004:
Topside (Optional) Cont.
Your control system may have a convertible heater (120 volts; or 240 volts). Refer to the
system data label to determine which, if any, convertible options are available to you. The
heater configuration was set at the factory and may have been changed by your installer.
A covered, 300-gallon spa will experience a heat rise approximately as detailed below.
Your system will operate with one of the following configurations:
120 Volts
- The heater will operate on demand at 4000-1500 Watts depending on the
wattage selected during low speed pump operation. It will automatically shut off when the
high-speed pump or blower is activated. You can expect a heat rise of 1°F to 2°F per hour.
240 Volt - The heater will operate on demand at 4000-5500 Watts depending on the
wattage selected during high and low speed pump operation. It will continue to operate
when the blower is activated. You can expect a heat rise of 6°F to 8°F per hour.
Heater Operation
Len Gordon
3-button, 6' cord
3-1/4” x 8-1/2”
Pres-Air-Trol
4-button, 6' cord
3-1/4” x 8-1/2”
Len Gordon Digital
2,3,4-button 6' cord
3-1/4” x 8-1/2”