Hydronix HV04, Руководство пользователя

Страница: 45 / 93

Chapter 5 System Navigation
Hydro-View User Guide HD0531 Rev 2.0.0 45
AutoTrack Value This is the AutoTrack value calculated by the sensor. See the
Calibration and Configuration Guide HD0679 for details on
using this value.
AutoTrack Deviation This is the deviation from the AutoTrack value. See the
Calibration and Configuration Guide HD0679 for details.
Output 2 Variable - (touch to select)
For sensors with two current loop outputs, select which measurement is to be output on
Current Loop 2. Options are the same as for Current Loop 1.
6.2.2 Analogue Outputs (2)
Figure 27: Analogue Outputs Screen 2
Output Type : (touch to select)
The working range of the current loop outputs can be configured to suit the equipment to
which it is connected.
High % - The high scale for Moisture output. This is the percentage Moisture represented
by 20mA output current.
Low % - The low scale for Moisture output. This is the percentage Moisture represented
by 0mA (or 4mA) output current.
The High % and Low % options are only available when at least one of the
analogue outputs is set to moisture %.
0-20mA This is the factory default. The addition of an external 500R
precision resistor converts to 0 – 10 V
4-20mA This is a standard 4 – 20 mA output
Compatibility Only available on pre HS0102 firmware sensors. See
appropriate user guide for details