HydroMatik LPS, Руководство по эксплуатации

Страница: 30 / 70

Page 30
Hoses:
For standard version:
The pump station has a hose leading to a manifold at the vortex
wall. From the manifold, it goes to all the nozzles of the LPS noz-
zle system.
Additionally:
» All hose assemblies are to be laid with a constant inc-
line.
» Put a 6/4 hose line in the pump station outlet (I).
» Check by gently pulling the tube.
» Estimate the hose length to the ducting snap-connector
(external duct wall). Maximum bend radius 40mm.
» Cut the hose at right angles with a hose cutter.
» Put the 6/4 hose line into the ducting angled snap-con-
nector (external duct wall).
» Check by gently pulling the tube.
» Put a further 6/4 hose line into the straight snap-con-
nector (internal duct wall).
Connection I: Water supply for
nozzles (for standard and partial
load operation)
Connection II, Optional: Water
supply for nozzles (only at full
load operation)