5
370 Encinal Street
, Suite 1
50
Santa Cruz, Ca 9506
0
P: 888-426-5644 / F: 831-336-9840
www.
hydrologicsystems.com
Determine the most prac
ti
cal under-the-sink loca
ti
on for placement of the
EcoSpring
TM
system. Ensure that the loca
ti
on allows adequate access for
cartridge re placement.
1. Place the system in the selected loca
ti
on.
2. Place the rubber seal (1)
fl
ush against the base of the faucet.
3. Insert faucet base assembly down through the sink hole.
4. From underneath the sink, push the 1/4” black drain tubing a
tt
ached to the
system onto the 1/4”
fi
tti
ng located on the faucet base.
5. Locate the extra piece of 3/8” white tubing and push one end onto the larger
3/8”
fi
tti
ng located on the faucet base.
6. Slide white plas
ti
c spacer (2) open-end-up onto the threaded faucet stem.
7. Loosely thread the 3/8" washer (3) and moun
ti
ng lock nut (4) onto the
threaded stem.
8. Thread faucet quick-connect adapter (5) on to threads of faucet stem. NOTE:
This connec
ti
on should be hand-
ti
ghtened only. Push end of 3/8" blue tubing
(located on the system) onto 3/8" adapter.
9. Posi
ti
on the faucet to the desired handle orienta
ti
on. Slip the (6) slo
tt
ed
washer between the white plas
ti
c spacer and the sink. Securely hand
ti
ghten
the moun
ti
ng nut.
10. Firmly insert spout assembly into the top hole of faucet body (approximately
1/4"). You may swivel the faucet le
ft
or right.
Note: We have a large selec
ti
on of designer faucets with a variety of
fi
nishes,
colors and styles available. Please visit www.eco-spring.com for details.
Push Handle Airgap Faucet
(1) Rubber seal
(3) 3/8" washer
(4) Moun
ti
ng
lock nut
(5) Quick connect
adapter
(6) Slo
tt
ed washer
(2) Plas
ti
c spacer