Hydro systems CP-5OO, Руководство пользователя

Страница: 10 / 16

10
LED Color Fixed or Flashing Indication
Green Fixed
The only time the LED should display as fixed green would be if the pump has reached the
Run / Shut off time for the top-up charge and stopped, but the signal remained active.
Flashing
Flashing green indicates the pump is dosing the top-up charge. The pump runs at full speed
for the set time.
Orange Fixed
You should not see the LED display as fixed orange.
(If you do see the LED fixed orange, please contact Technical Support at Hydro Systems Co.)
Flashing
Flashing orange quickly (1 second on, 1 second off) is an Alarm, indicating the pump motor is
jammed or that the unit is turned off.
Red Fixed
The only time the LED should display as fixed red would be if the pump has reached the Run /
Shut off time for the initial charge and stopped, but the signal remained active.
Flashing
Flashing red indicates the pump is dosing the Initial charge. The pump runs at full speed for
the set time.
2.OO installation
(continued)
Detergent Pumps - Signal Wiring and Programming (continued)
Model D2TT - Dish Machine with Two Solenoids (continued)
The LED of a model D2TT can display three colors to indicate the various pump operation phases:
2.OO installation
(continued)
Rinse Pump Speed
Potentiometer
10% to 100%
Model R1ST: Speed and Run/Shut-off
Run/Shut-off
Potentiometer
C, or 1-240 seconds
10% C
100% 240
Rinse Pumps - Signal Wiring and Programming
Model R1ST - Dish Machine with One Solenoid
Connect the signal cable to the solenoid valve for the rinse water.
Speed Setting
The pump runs at the speed set using the left potentiometer.
• Minimum speed (completely turned counterclockwise): 10%
• Maximum speed (completely turned clockwise): 100%
The speed setting is also indicated by flashing the green LED, proportional
to the set speed. For example:
10% = 5 seconds ON / 5 seconds OFF = one flash per 10 seconds
50% = 1 second ON / 1 second OFF = five flashes per 10 seconds
100% = 0.5 second ON / 0.5 second OFF = ten flashes per 10 seconds
Run/Shut-off Time Setting
Use the right potentiometer to set the rinse pump run/shut-off time.
(continued)
LED