HydraMaster TITAN 425 страница 11 Скачать руководство пользователя

Страница: 11 / 55

9 - TITAN 425 Owner’s Guide

Distributor’s Responsibility

Acceptance of Shipment

Before accepting the truckmount, check the following:

1. The truckmount should be free from any damage during shipping. Do not sign the

delivery receipt until you have closely inspected the truckmount and noted any

damage on the delivery receipt. Hidden damage may be present even if the box

looks okay. It is recommended that the box be opened before you sign for the

shipment.

2. Check the packing list and verify that all items are accounted for.

Installation Responsibilities

• Ensure proper payload capacity. It is the distributor’s responsibility to verify that the

equipment package does not exceed the vehicle capacity.

•

Ensure installation of a safe fuel tap system and through-floor fittings as provided by

HydraMaster.

• Ensure proper placement of the truckmount, recovery tank, fresh water tank, and

accessories in the vehicle, and check that they are secured with bolts and back up

plates. The distributor should verify that the owner is in agreement with the layout.

• Ensure proper connection of the fuel lines.

• Ensure proper connection and installation of the battery. Verify that the battery is in

accordance with HydraMaster’s recommendation.

• Check the pump, vacuum blower and engine oil levels prior to starting the truckmount.

• Start and run the truckmount and check that all systems function properly.

• Test all hoses, wands and other accessories for correct operation.

• Ensure timely return of the document package.

Содержание TITAN 425
























































Результаты поиска

Содержание TITAN 425

Отзывы:

Похожие инструкции для TITAN 425

Бренды по названию

Популярные бренды

HydraMaster TITAN 425, Руководство пользователя и график технического обслуживания

Результаты поиска

Содержание TITAN 425

Отзывы:

Похожие инструкции для TITAN 425

Бренды по названию

Популярные бренды