Page 3-1 : CTS 450 Owner’s Manual
Hot Carbonating Truckmount System
CTS 450
Operating Instructions
WARNING
!
Do not jump start machine! Damage may occur to Electrical System!
Start Up, Gasoline Engine
1. Perform daily and periodic mainte-
nance as specified in this Owner’s
Manual.
2. Pull out Choke knob.
3. Switch engine speed to IDLE posi-
tion.
4. Start engine.
5. Push in Choke knob.
6. Allow engine to warm up in the idle
position for 3-5 minutes.
7. Switch engine speed to CARPET or
UPHOLSTERY.
Start Up, Diesel Engine
1. Perform daily and periodic maintenance as specified in this Owner’s Manual.
2. Switch engine speed to IDLE position.
3. Turn the ignition switch to the “ON” position. Wait for the “Glow Plug Light” to
turn off.
4. Start engine.
5. Allow engine to warm up in the idle position for 3-5 minutes.
6. Switch engine speed to CARPET or UPHOLSTERY.
Notes:
- The engine throttle has three settings: IDLE, UPHOLSTERY, and CARPET.
The machine cannot be run in the IDLE position for cleaning upholstery,
carpet, or flood extraction. This will void the warranty.
- The machine operates at a pressure of 100-120 psi.
Figure 3-1
WARNING
!
Содержание CTS 450
