HydraMaster CDS 4.8, Руководство пользователя

Страница: 45 / 141

HydraMaster Corporation
Page 6-4 Clutch Drive System
1. Servicing the Valves (cont.)
E. Reinstall valve assemblies:
1. Using a clean towel, clean the valve chamber.
2. Install the o-ring into the high pressure manifold.
3. Install the valve assemblies into the high pressure manifold
(the metal side of the valve faces the manifold).
4. Replace the O-ring on the hex valve plug.
5. Torque the plug to 72 foot pounds.
2. Removing the High Pressure Manifold
A. Using an M6 allen wrench, remove all eight of the socket head bolts.
B. Rotate the crankshaft by hand to start separation of the manifold head
from the crankshaft.
C. Insert two flat-head screwdrivers on opposite sides to further separate
the manifold from the crankshaft.
To avoid damage to either plunger or seal, keep the manifold properly aligned
with the ceramic plungers when removing it.
D. Remove the seal retainer from the manifold and inspect for wear.
E. Examine the ceramic plunger for cracks or scoring (refer to Servicing the
Plungers for replacement).
♦
CAUTION
♦
5/5/99