HydraMaster CDS 4.8 Скачать руководство пользователя

Страница: 34 / 141

HydraMaster Corporation

Page 4-2

Clutch Drive System

To Drain the Machine, Follow These Steps (cont.):

C. Close the mix tank drain and fill the mix tank with 50/50 antifreeze and

water mixture. Run the unit for 1 minute to circulate the mixture through

the machines low-pressure hoses. Spray through the wand or other tool into

a suitable container until the mix tank shut-off switch activates (pump stops).

This freeze guards the high-pressure circuit

D. Open the mix tank drain and drain out the residual fluid into a suitable

container. This antifreeze solution may be retained for reuse (attach

freeze guard fitting to inlet quick connect and vacuum water out of

the inlet line).

One manufacturer of antifreeze cautions:

WHEN DISPOSING OF USED ANTIFREEZE COOLANT: Follow local laws and regula-

tions. If required, dispose at facilities licensed to accept household hazardous waste.

If permitted, dispose in sanitary sewer systems. Do not discard into storm sewers,

septic systems, or onto the ground.

This warning appears on the label of one brand of antifreeze:

HARMFUL OR FATAL IF SWALLOWED. Do not drink antifreeze coolant or solution.

If swallowed, induce vomiting immediately. Call a physician. Contains Ethylene

Glycol which caused birth defects in animal studies. Do not store in open or unla-

beled containers.

KEEP OUT OF REACH OF CHILDREN AND ANIMALS.

5/17/99

♦

CAUTION

♦

WARNING

♦

Содержание CDS 4.8














































































































































Результаты поиска

Содержание CDS 4.8

Отзывы:

Похожие инструкции для CDS 4.8

Бренды по названию

Популярные бренды

HydraMaster CDS 4.8, Руководство пользователя

Результаты поиска

Содержание CDS 4.8

Отзывы:

Похожие инструкции для CDS 4.8

Бренды по названию

Популярные бренды