manualshive.com logo in svg

HydraMaster Boxxer 423s, Руководство пользователя, Страница: 36 / 92

Поделиться
Скачать
HydraMaster Boxxer 423s Скачать руководство пользователя страница 36

5-13:  Machine Maintenance

   Machine Maintenance:  5-12

Extracting Seals
With manifold removed from crankcase:

1.  Insert proper extractor collet through main seal retainer (see Figure 5-11).
2.  Tighten collet and extract retainers and seals.

The Teflon seals of the HT series will be damaged during disassembly so new 

ones with have to be installed.

Figure 5-11.  Extract Retainers and Seals

Replacing the Seal Assemblies
Only one seal kit is necessary to repair all the seals in the pump (see Figure 5-12). Use 
an insertion tool for seal installation 

To install a seal assembly:

1. 

Apply a film of O-ring grease on the O-ring on the outside of the new high pressure seal.

2.  Insert the high pressure seal into the cavity with the “U” shape down.
3.  Press high pressure seal into place.
4. 

Apply a film of grease on the O-ring on the brass retainer (see 

Figure 5-13).

Figure 5-13.  Install Seal Assembly Using O-Ring Grease

Figure 5-12.  Seal Kit and Insertion Tool for Seal Installation

Содержание Boxxer 423s





























































































Отзывы:

Нет отзывов