HYDAC International ALPC 9000 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 68

ALPC 9000 series Description of the ALPC
HYDAC FILTER SYSTEMS GMBH
en
Page 15 / 68
BEWA ALPC9000 3601005 en 2011-04-07.doc 2011-04-06
Description of the ALPC
The ALPC is a fully automated laboratory particle counter for the analysis of
hydraulic and lubricating fluids in oil analysis laboratories.
A sample pallet with samples is positioned on a sample shaker next to the particle
counter; each sample is individually added to the particle counter.
The sample shaker serves to keep the samples homogenized. Prepare the samples
before adding them into the sample pallet.
You can file an ID number for each sample as a reference in the ALPCDesk
software.
Initiated by pressing a key on the PC keyboard or by clicking on the mouse, the
particle counter carries out an automatic analysis of the sample.
The analsysis of a sample is only accepted if the measurement values of two
subsequent sample runs lie within a predefined tolerance.
The analysis of a sample is rejected if it does not lie within a predefined tolerance
after five sample runs. The number of maximum sample runs can be defined in the
ALPCDesk software.
The ALPC flushes the sensor manually after the key is pressed, or automatically
after each sampling procedure. The flushing fluid is analysed during the flushing
process. The flushing process can be controlled according to the level of
contamination or the time.
The recorded data (particle numbers and ISO codes) are stored on the hard drive.
You can call up these measurement values again at any time using the ALPCDESK
software.