HYDAC FILTER SYSTEMS MFU-15E, Инструкция по эксплуатации и техническому обслуживанию

Страница: 73 / 120

HYDAC FILTER SYSTEMS GMBH Manual operation | 6
BeWa MFU-15E_S 4391552c en-us web 73 / 120
6.3 Selecting the operating modes
Select the optimal operating mode for your requirement. In or-
der to do this, use a suitable filter element
(900)
or an empty
element
(910).
Details for insertion or exchanging this can
be found in Chapter Changing the filter element [
}
86] . Suit-
able filter elements can be found in Chapter Finding the filter
elements.
You will find further details on the operating modes in the sub-
sequent chapters.
900
Filter element
910
Empty element
In this context, ensure that:
- The suction hose suctions as close to the bottom of the
reservoir as possible, however not directly at the base.
- The pressure hose allows the cleaned oil to flow back into
the reservoir, as far as possible at the top of the reservoir,
but below the oil level, without the oil being enriched with
air.
1
2
3
4
5
6
7
8
9
A