HYDAC FILTER SYSTEMS FAM-50-M-2-A-45-Z-Z-D-Z-1/-EX02-F Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 88

HYDAC FILTER SYSTEMS FAM-50-M-2-A-45-Z-Z-D-Z-1/-EX02-F Скачать руководство пользователя страница 6

Preface

FAM 15-70 ATEX

en

Page 6 /

88

BEWA FAM-15-70 II 2G IIB+H2 T4 EX02 4510066 en-us 2020-01-24.docx

2020-01-24

Technical Support

Contact our technical sales department if you have any questions on our
product. When contacting us, please always include the model code, serial
no. and part no. of the product:

Fax:

++49 (0) 6897 / 509 - 01

E-mail:

[email protected]

Product modification

We would like to point out that changes to the product (e.g. purchasing
options, etc.) may result in the information in the operating instructions no
longer being completely accurate or sufficient.

After modification or repair work that affects the safety of the product has
been carried out on components, the product may not be returned to
operation until it has been checked and released by a HYDAC technician.

Please notify us immediately of any modifications made to the product
whether by you or a third party.

Warranty

For the warranty provided by us, please refer to the terms of delivery of
HYDAC FILTER SYSTEMS GMBH.

You will find these under www.hydac.com -> General terms and conditions.

«
...
4
5
6
7
8
...
»

Содержание FAM-50-M-2-A-45-Z-Z-D-Z-1/-EX02-F

























































































Отзывы:

Нет отзывов