HDA 4000W intrinsically safe, non-sparking, dustproof enclosure: ATEX and IECEx
6
Status: 2021-11-22
HYDAC ELECTRONIC GMBH
Part
no.: 670063
The pressure transmitters series carry the
- mark. The declaration of conformity can be found in
the annex.
The requirements of the standards (see Technical Data) cannot be satisfied unless the pressure
transmitter housing is properly grounded via the mechanical connection. When using hose
mounting the housing has to be grounded separately.
4.1
Batteries
When using the pressure transmitter in potentially explosive atmospheres, no
other batteries than the below listed may be used:
2x Energizer Ultimate Lithium AA L91
4.2
Battery replacement
Batteries may only be replaced if a potentially explosive atmosphere can be fully
excluded.
Do not dispose of the used batteries with the general garbage, recycle or dispose
of the batteries safely and properly according to locally valid laws and
regulations.
Loosen the four screws of the battery cover (2.5 mm hex socket) and remove the cover.
Used batteries may only be replaced in pairs.