Hyd-Mech VW18, Инструкция по безопасности и эксплуатации, Страница: 34 / 80

2.17
SEMI AUTO:
• Depress to toggle between MANUAL and AUTOMATIC MODE.(The selected mode will be displayed
on the LCD)
• A lit LED will be visible when AUTOMATIC MODE is selected.
• Push button is also used to enter a decimal point when numerical data input is required.
HEAD SWING FAST:
• Depressing and holding this button with either HEAD SWING - CCW or HEAD SWING + CW, will
allow the head to swing in a faster speed.
• Push button is also used to /- sign when numerical data input is required.
• Push button is also used to change head movement direction between Left (L) and Right (R) when
entering angle A or angle B.
CYCLE
PAUSE
CYCLE PAUSE:
• When depressed the controller will pause the cycle in progress.
• When depressed in MANUAL MODE the blade will stop and the display on the top line of the LCD
will display: READY
• When depressed in SEMI AUTOMATIC MODE the blade will stop, the head will move back and the
display on the top line of the LCD will display: READY
• To continue the cycle follow the action items for CYCLE START (page 2.8)
.
SEMI
AUTO
+/-
HEAD
SWING
FAST
Turn the machine disconnect switch to ‘1’ (ON position) to apply power to the machine and release the
EMERGENCY STOP if depressed. (To reset the button, simply rotate through 45º)
STARTING THE MACHINE (POWER TILT OPTION)
COMMAND
ENABLE
MACHINE
START
Follow instructions on the LCD:
Depress and hold COMMAND ENABLE then depress MACHINE START
Select mode operation:
Depress once for MANUAL MODE.
Depress twice for SEMI AUTOMATIC MODE.
.
SEMI
AUTO