Hyco Zen Life LIFE3L, Инструкция по эксплуатации товара, Страница: 13 / 29

Step 6 - Connect Mains Hot and Cold Supply
• T -off from the cold mains incoming water supply (t-section not supplied). Ensure
this is before the connection which has been made to facilitate connection to 3/8”
tubing.
• Pipe to the hose attached to the Zen Life tap which is for cold water tap connection.
• Make connection from copper pipe to hose using 1/2” BSP to 15 mm brass fitting.
• Make a connection to the hot mains incoming water supply using 1/2” BSP to 15
mm brass fitting. We recommend fitting a service valve (not supplied) close by to
aid any future maintenance.
• Connect from 1/2” BSP to 15 mm brass fitting to the hose attached to the Zen Life
tap which is for mains hot water tap connection.
• Secure the bracket to the wall using the fixings supplied. Replace the scale filter
cartridge.
Without Crossover Valve
• Use a suitable length of 3/8” tubing (cut using sharp knife, ensuring a clean straight
cut) to connect from mains supply to scale filter head inlet, ensuring water flow
arrow is followed.
• Use a suitable length of 3/8” tubing to connect from the scale filter head outlet,
ensuring water flow arrow is followed, to manifold inlet using ½“ female to 3/8 “ PF
connector.
With Optional Crossover Valve
• If you are installing a Crossover Valve, use a suitable length of 3/8” tubing (cut using
sharp knife, ensuring a clean straight cut) to connect from mains supply to t-piece
supplied.
• Use a suitable length of 3/8” tubing to connect from t-piece to scale filter head
inlet, ensuring water flow arrow is followed.
• Use a suitable length of 3/8” tubing to connect from the scale filter head outlet,
ensuring water flow arrow is followed, to manifold inlet using ½“ female to 3/8 “ PF
connector.
13