Hyco Ara IN30T, Инструкция по эксплуатации товара

Страница: 2 / 16

Overview
Thank you for purchasing an Ara Instantaneous Water Heater. Instantaneous water heaters
are very energy efficient as they only consume energy when they are in use, so have no
standing losses. The IN30T is intended for light hand washing at a single basin and must be
used with a spray head tap.
Key Features
• Hot water for light handwashing at a single basin only
• Bare wire heating system gives fast heat up time
• Heats the water instantly as it flows through the unit
• Energy efficient – no standing heat losses
• Compact space saving design
• External electronic thermostatic control accurate to the nearest degree
• LED temperature display
• Energy saving – only uses the power required to deliver the chosen temperature
• Not suitable for use with thermostatic mixing valves or taps or to supply a mixer tap
The appliance must only be connected to a single phase supply.
Isolate electrical and water supply before installation.
Electrical installation must be carried out by a qualified electrician in accordance
with the latest edition of the IEE wiring regulations.
Only connect the appliance to a power supply that conforms to the specification
stated on rating plate.
The appliance must be earthed at all times.
The appliance must be permanently connected to the electrical supply through
an isolating switch with a contact separation of no less than 3mm in all poles.
Important Safety Points
Please fully read these instructions before commencing installation and follow to ensure
that installation and operation are simple and safe.
2