Hyco Ara IN30T, Инструкция по эксплуатации товара

Страница: 8 / 16

4. Operation
Before switching on power to the unit the system must be full of water and tested
for leaks.
This water heater is for low flow hand washing at a single basin only.
Instantaneous heaters only heat water as it passes through the tank. Because the
maximum power of the heater is fixed there is a limit to the rate at which hot water
can be delivered.
• Turn on the heater using the on/ off touch screen (see diagram 3). It will automatically
begin heating when it detects a flow of water through it.
• On first installation the heater requires an initial 12 seconds (approx) of continuous
water flow through the unit to start heating.
• When the water flow is turned on using the outlet/ tap, the heater will display the
current water temperature. The electronic temperature display will only operate
whilst water is flowing through the heater.
• Whilst water is flowing through the heater, the target temperature can be adjusted
using the left / right hand touch screen adjustments. After a second or two the heater
will go back to displaying the current water temperature and the new setting is
stored.
8
Diagram 3