Hy-Brid Lifts
21
Maintenance & Troubleshooting Manual
HB-P827 / HB-P1027
Part No. SUPO 670
Rev. C
Figure 11:Battery Charger LED Display
Battery solution is at its proper strength
when the battery is manufactured. Use
distilled water and keep fluid up to proper
level. When required, water should be
added to battery after charging, unless
water level is below the plates.
POWER
BATTERY 1 STATUS
BATTERY 1 STATUS
POWER
POWER
BATTERY 1 STATUS
CHARGING
CHARGING
READY
CHARGING
READY
READY
Green LED
(ON)
Green LED
(ON)
Green LED
(ON)
Green LED
(ON)
Red LED
(OFF)
Green LED
(OFF)
Red LED
(ON)
Green LED
(OFF)
Red LED
(OFF)
Reading the Battery Displays
This display indicates that the power is on but there is no con-
nection to a battery. The charger must see approximately five
(5) volts on a battery to deliver D/C current.
This display indicates that power is on and that both outputs are
delivering D/C current to the batteries.
This display indicates that power is on and that the output is
finished charging and is in a float maintenance model.
SECTION 6 | MAINTENANCE
