Hy-Brid Lifts
9
Maintenance & Troubleshooting Manual
HB-P827 / HB-P1027
Part No. SUPO 670
Rev. C
SECTION 2 | SAFETY
2.1 | Safety Symbols
Warnings and instructions that have a direct impact on safety are identified with the following
signals:
FAILURE TO FOLLOW THIS WARNING WILL
CAUSE DEATH OR PERSONAL INJURY.
“DANGER” indicates an imminently hazardous
situation, which, if not avoided, will result in
death or serious injury.
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE DEATH OR PERSONAL INJURY.
“WARNING” indicates a potentially hazardous
situation, which, if not avoided, could result in
death or serious injury
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE INJURY OR DAMAGE EQUIPMENT
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury or damage to equip-
ment
2.2 | General Rules and Precautions
Custom Equipment, Inc. designed the Hy-Brid Lift push-around scissor lift to be safe and reliable.
It is intended for elevating personnel, along with their necessary tools and materials to overhead
work locations. Vibration does not create significant hazards on this machine.
An operator of any type of work platform is subject to certain hazards that cannot be protected
by mechanical means. It is therefore essential that operators be competent, careful, physical-
ly and mentally fit, and thoroughly trained in safe operation of this machine. Although Custom
Equipment, Inc. conforms to specified ANSI & OSHA requirements, it is the responsibility of the
owner to instruct operators with the safety requirements made not only by Custom Equipment,
Inc., but by the various safety boards in your area, as well as additional requirements set forth by
ANSI & OSHA If you come across a situation that you think might be unsafe, stop the platform and
request further information from qualified sources before proceeding.
DANGER
WARNING
CAUTION
