- 54 -
USER CHORUS EFFECT
This function makes it possible to create your own Cho-
rus effect. It
’
ll be included in the Sound Effects List named
UserChorus for your choice. 5 parameters for User Cho-
rus setup are listed below.
The way of the setup is the same as User Reverb setup.
Parameter
Description
Data
Mode
Define Chorus effect Mode.
1=Chorus 2=Flanger
3=Tremolo 4=Phaser
Feedback
The chorus type effects have a feedback loop after the delay.
Feeding back a small amount of the sound intensifies the
effect.
0 - 127
Pre-HP
Pre Hi-pass filter. It filters out low frequency
0 - 127
LFO Rate
Low Frequency Oscillator (LFO) rate is applied as
modulation rate. Higher is the rate, more intensive will be the
effect.
0 - 127
Depth
Depth is the maximum amount of modulation applied to the
delay.
0 - 127
SYSTEM SETUP
UserChorus
SETU P
ENTER
EXIT
Parameter
Description
Data
Mode
Define the delay Mode.
1=Mono delay
2=Stereo delay
Delay Time
It determines the delay time. 0 represents 0 ms, 127 represents
1.3 seconds.
0 - 127
Feedback
Feeding back a small amount of the sound intensifies the
effect.
0 - 127
Pre LP
Pre Low Frequency filter rate. Higher is the rate, more
hi-frequency is filtered out.
0 - 127
USER DELAY EFFECT
This function makes it possible to create your own Cho-
rus effect. It
’
ll be included in the Sound Effects List named
UserChorus for your choice. 4 parameters for User Cho-
rus setup are listed below.
The way of the setup is the same as User Reverb setup.
User Delay
SETU P
ENTER
EXIT