- 29 -
PHRASE
When the recording is stopped, press the
button and
its indicator lights up. After one measure count-in, you
’
ll
hear what you recorded from the first measure. The mea-
sure count will be displayed as well. The playing repeats
in loop until you press the
button again to stop it and
its indicator will quench.
During the playing back, you can play pads but it
’
ll not be
recorded.
You can change the tempo, drum kit and turn On/Off the
metronome in the same manner described above.
When the playing is stopped, pressing the button to re-
enter the record stage to modify your recording. Tempo
and drum kit changes you made will stay on.
Note:
There is no mode mark in the display and
you cannot change the record mode here.
You can save your recording as user phrase. The capac-
ity of the drum is to save up to 30 phrases.
When recording or playing back stops, you can enter the
save window by pressing the EXIT button. The first avail-
able phrase number will appear and blink. Press the EN-
TER button to save it and turn to the phrase select window.
Or, you could change the phrase number to save using
the Data knob. If this number is used for previous
recording, the display will warn you
“
Save it?
”
because
this existing phrase will be replaced by new one. Press
the ENTER button to save it and turn to the phrase select
window.
If you don
’
t want to continue the saving procedure, you
have three options:
Press the button to go back to the recording stage.
Press the
button to go back to the playing stage.
Press the EXIT button to the phrase select window.
Note:
If you press the EXIT button, your record
will be lost.
Tip:
This is the only way to give up current recoding
operation.
PLAYBACK CURRENT RECORDING
SAVE RECORDING
M.Set016
KIT
SETU P
ENTER
EXIT
Save?
SETU P
ENTER
EXIT
SavePhrase