- 20 -
CHAIN
CLICK
PHRASE
METRONOME
Press the CLICK button, the metronome will start
immediately. The metronome sound is louder at the first
beat and lower for other beats. The CLICK indicator will
flash per beat and tempo setting. The indicator will be
lighter at the first beet. Press the CLICK button again to
stop it.
Press and hold down the CLICK button for 2 seconds to
setup the metronome; and the indicator will blink. The
metronome will keep sounding and response to your set-
ting in real time.
Use the Data knob to setup. After parameter setting, press
the ENTER button to confirm your setting and turn to the
next parameter setting.
Press the KIT button to exit the setting and back to the
Kit Selection window.
Following parameters can be changed.
MetroTempo
MetroVol
(3) Volume - The current metronome volume will blink.
Rotate the DATA knob to change it ranged 0 - 127.
(2) Beat - the current beat will blink. Rotate the DATA
knob to change the beat ranged 2 - 12. The beat will
also be shown in the right side of the screen. The default
beat is 4.
(1) Tempo - The current tempo will blink. Rotate the DATA
knob to change the tempo ranged 40 - 240 beat per
minute. The tempo will be also shown in the right side of
the screen. The default tempo is 120.
2 Sec.
MetroBeat
SETU P
ENTER
EXIT
SETUP
ENTER
EXIT
SETU P
ENTER
EXIT
Tip:
If you do not want to change the current
parameter, press the ENTER button to skip it.