HWR InoFlex VF016, Руководство по эксплуатации

Страница: 23 / 53

3
Transport and Installation
© Copyright
InoFlex
®
VF016 - VF026
Page 3-15
HWR Spanntechnik GmbH Edition C
EN
3.2.3 S
AFETY PRECAUTIONS FOR TRANSPORT
Heavy centering vices may only be transported (with additional tools if nec-
essary) by specially qualified personnel.
General hazard
During transport, there is a risk of the component to tilt, swing or fall.
This can result in equipment damage or serious bodily injury.
The following measures must be taken to prevent equipment damage and
life-threatening injuries:

The centering vice may only be lifted on the designated attachment
point.

When lifting or hanging the centering vice and also during transport
please consider the center of gravity and the position of the attachment
point.

Load-carrying and lifting equipment must comply with the accident
prevention regulations.

When selecting the load-carrying and lifting equipment make sure to
consider the weight of the centering vice and if necessary the length of
the load arm (e.g. crane boom).

Make sure to cordon off the transport routes used to transport floating
loads and mark these routes to prevent people from walking below the
loads.
General hazard
At no time are people allowed under a floating load. Risk of accident!