HWR InoFlex VF016, Руководство по эксплуатации

Страница: 16 / 53

1
Safety
Page 1-8
InoFlex
®
VF016 - VF026
© Copyright
Edition C HWR Spanntechnik GmbH
EN
1.6.2 R
EQUIREMENTS FOR OPERATING
/
MAINTENANCE PERSONNEL
The operator commits himself:

To only allow trained personnel (specialised in metal) and CNC milling
operators to work with the InoFlex
®
centering vice

To clearly define the responsibilities of personnel charged with
installation, commissioning, operation, maintenance and repair

To only allow personnel being trained to work with the InoFlex
®
centering
vice under the supervision of an experienced professional (specialised
in metal) or a CNC milling operator.
All persons who are assigned to operate the InoFlex
®
centering vice agree:

To always ensure the safety of third parties, the InoFlex
®
centering vice
and the machine tool

To read the operating manual, the chapter on safety and the warning
instructions and to confirm with their signature that they have
understood them

To observe the basic regulations concerning work safety and accident
prevention

To only use the InoFlex
®
centering vice if they are familiar with the
function of the centering vice itself and the function of the machine tool
and have full control over the corresponding safety and emergency
equipment
The operating personnel must be completely focused when working with
the machine tool and the InoFlex
®
centering vice.
General hazard
These are matters which concern your own safety and the safety of
colleagues and bystanders in the vicinity of the machine!