HWR InoFlex VF016, Руководство по эксплуатации

Страница: 15 / 53

1
Safety
© Copyright
InoFlex
®
VF016 - VF026
Page 1-7
HWR Spanntechnik GmbH Edition C
EN
1.6 O
BLIGATIONS
1.6.1 O
BLIGATION OF THE OPERATING COMPANY
The operator agrees to only allow those persons to work with the InoFlex
®
centering vice who

are familiar with the basic regulations on safety and accident prevention
and who have been instructed in the operation of the InoFlex
®
centering vice

have read and understood the operating manual, the chapter on safety
and the warning instructions and who have confirmed this with their
signature
The operator is responsible for the selection of the operating personnel. He
must pay particular attention to the suitability of the personnel selected for
operating a machine tool with the InoFlex
®
centering vice.
The operator always supplies his operating and maintenance personnel
with the entire product documentation.
The operator periodically checks the operating and maintenance personnel
with respect to safety conscientious work behavior.
The operating company of a machine tool with the InoFlex
®
centering vice
must abide by and observe the following rules and regulations:

The functional limits and safety regulations listed in the technical operat-
ing manuals.
General hazard
The operating company is ultimately responsible for safety. This re-
sponsibility cannot be delegated.