HWR InoFlex VF016, Руководство по эксплуатации

Страница: 13 / 53

1
Safety
© Copyright
InoFlex
®
VF016 - VF026
Page 1-5
HWR Spanntechnik GmbH Edition C
EN
1.3 I
NTENDED USE
1.3.1 T
HE SOLE INTENDED USE
The InoFlex
®
centering vice VF016 - VF026 is intended solely for the
clamping of components for mechanical machining in milling machines (see
also Chapter "7" Technical Data).
Any other use is considered improper. The manufacturer is not liable for
damages resulting from improper use.
1.3.2 O
BSERVE THE NOTES AND INSTRUCTIONS
Intended use also includes:

Following all the instructions in the documentation as well as the
manufacturer-supplied documentation (if applicable)

Compliance with the manufacturer's prescribed service and
maintenance conditions and intervals
1.3.3 O
BSERVE THE ACCIDENT PREVENTION REGULATIONS
Observe the applicable accident prevention regulations and other generally
recognized regulations related to safety.
1.4 W
ARNING ABOUT FAULTY OPERATION AND MISUSE
Your InoFlex
®
centering vice has been tested at the factory. However, there
are risks associated with faulty operation or misuse, e.g.:

Risk to life and health of operators, third persons and animals in the
vicinity of the machine tool in which the centering vice is used

Risk to the machine tool, the centering vice and other property of the
operating company

Risk of losing efficient operation of the machine tool, in which the
centering vice is installed.